Quality Piston Fillers



The Principle

The Flo-Master employs a very simple, volumetric method to draw liquids and other low viscosity products such as oils or juices directly from a tank or drum, eliminating the need for a hopper. This model and also be used as a metering pump to dispense a controlled volume.

How it works

1. The piston takes an intake stroke drawing product from the hopper through the lower check valve while closing off the upper check valve. 2. On the discharge stroke, the piston pushes the product from the cylinder through the upper check valve to the nozzle, while closing the lower check valve.


Operation

First, the operator drops a line of flexible tubing into a drum or tank. Then the volume of fill hand wheel is adjusted to the desired setting. The operator places an empty container under the filling nozzle, presses the foot pedal and the exact quantity is drawn from the drum and dispensed into the container. The machine operates one fill at a time and shuts off until the foot pedal is again pressed.

Standard Features

Stainless steel and food grade plastic product contact parts, stainless base, cylinder, piston, filling nozzle, two check valves, air logic, flexible tubing, and  foot pedal.

Models

  Free Video of machines are available.   Video Tape 

 Click on image to enlarge, link will open in a new window.


Flo-Master Jr.


This is our smallest liquid filler. This unit is ideal for labs and low volume production.

  • fills from 2ml to 180ml

  • production - 5 to 50 per min.

  • no hopper needed

  • models up to 10 nozzles

  • can be automated

Video

Literature

For Multiple Nozzle & Custom Models Click Here


Flo-Master Quart

This is a medium range production filler. This machine will handle liquids to medium viscosity homogeneous products.

  • fills from 30ml to 1000ml per cycle

  • smaller volumes with change parts

  • no hopper need

  • models up to 10 nozzles

  • can be automated

  • many options available

Video

Literature

For Multiple Nozzle & Custom Models Click Here


Flo-Master Gallon

This is a heavy duty filler that can easily draw and dispense gallons of liquids and homogeneous products.

  • fills from 240ml to 4000ml per cycle

  • smaller volumes with change parts

  • no hopper needed

  • models up to 6 nozzles

  • can be automated

  • many options available

Video

Literature

For Multiple Nozzle & Custom Models Click Here


Flo-Master 2.5 Gallon

This is a medium range production filler. This machine will handle liquids to medium viscosity homogeneous products.

  • fills from 500 ml to 10000 ml per cycle

  • smaller volumes with change parts

  • no hopper need

  • models up to 2 nozzles

  • can be automated

  • many options available

Video

Literature

For Multiple Nozzle & Custom Models Click Here


Home Products Parts & Service Info. Request contact Us Videos